Plastic Product Range
Our lineup of submersible level sensors, float valves, and high-performance liquid level switches. Designed for use in corrosive, high-pressure, and challenging liquid environments, these products offer cutting-edge technology and durability. Check out the newest releases from PVL, Kelco, Riko, Icon, Chemline, AQT, ATMI & Senseca below!
- Corrosive Chemicals, Acids, Bases
- Integral Weight, Eliminates Floating
- Ceramic Sensing Diaphragm
- High Accuracy
- Non Clogging Design
- PTFE Teflon ® Jacketed Cable Excellent for Foam, Vapor, Condensate
- Heavy Duty Rugged Design
- No Moving Parts
- Automatic Temperature Compensation
- Capacitive Ceramic Sensing Diaphragm
- FFKM Kalrez® O-Ring Seals
- Integral Weight Eliminates Floating
- Excellent Long Term Stability
- Lower Temperatures, -40°F
- Flush Sensor, Non Clogging Design
- Heavy Duty PTFE Teflon ® Cable
- Excellent for Foam, Vapor, Condensate
- 2X Higher Accuracy than Piezo Ceramic
- 99.9% Al 2 0 3, Superior Chemical Resistance
- Zero Hysteresis, Rapid Response
- Thread Size: Int 1/4” BSP, Ext 3/8” BSP
- Valve Material: POM
- Ball Material: PP
- Plug Material: SR
- Pressure: 0.02-0.6 MPa
- Water. Temp: -30ºC to +75ºC
- Flow Rate: 1.8 (P=0.6 Mpa)
- Length (max): 153 mm
- Thread Size: 1/4” BSP
- Valve Material: POM
- Ball Material: PP
- Plug Material: SR
- Pressure: 0.02-0.6 MPa
- Water. Temp: -30ºC to +75ºC
- Flow Rate: 1.8 (P=0.6 Mpa)
- Length (max): 101 mm
- Thread Size: 1/2” BSP - 3/4” BSP
- Valve Material: ABS
- Ball Material: PE
- Ball Diameter: 50mm
- Plug Material: NR
- Pressure: 0.05-1.0 MPa
- Water. Temp: -35ºC to +75ºC
- Flow Rate: 60 (P=0.6Mpa)
- Length (max): 19.60 cm
- Thread Size: 1/2” BSP to 3/4” BSP
- Valve Material: ABS
- Ball Material: PE Ball Diameter: 85mm
- Plug Material: NR
- Pressure: 0.05-1.2 MPa
- Water. Temp: -35ºC to +75ºC
- Flow Rate: 60 (P=0.6 Mpa)
- Length (max): 28.50 cm
- Thread Size: 1/2” BSP to 3/4” BSP
- Valve Material: ABS
- Ball Material: PE Ball Diameter: 95mm
- Plug Material: NR
- Pressure: 0.05-1.2MPa
- Water.Temp: 35ºC to +75ºC
- Flow Rate: 220 (P=0.6 Mpa)
- Length (max): 25.50cm
- Thread Size: 1/4” BSP
- Valve Material: POM
- Ball Material: PP
- Plug Material: SR
- Pressure: 0.02-0.6 MPa
- Water. Temp: -30ºC to +75ºC
- Flow Rate: 1.8 (P=0.6 Mpa)
- Length (max): 153 mm
- Thread Size: 1” BSP to 3/4” BSP
- Valve Material: ABS
- Ball Material: PE
- Ball Diameter: 95mm
- Plug Material: NR
- Pressure: 0.05-1.2 MPa
- Water.Temp: -35ºC to +75ºC
- Flow Rate: 310 (P=0.6 Mpa)
- Length (max): 25.50cm
- Quick stop design, eliminates water hammer
- Higher flow rate than brass or stainless steel float valves
- Anti corrosion rust proof, PV resistant, suitable for sea water
- Adjustable arm can be used in the vertical or horizon water
- Temperature range from -35ºC to +75ºC
- Thread Size: 1 ½“ BSP
- Valve Material: ABS
- Ball Material: PE
- Ball Diameter: 95mm
- Plug Material: NR Pressure: 0.10-1.2 MPa
- Water. Temp: -35ºC to +75ºC
- Flow Rate: 190 (P=0.6 Mpa)
- Length (max): 37.70 cm
- Thread Size: 2” BSP
- Valve Material: ABS
- Ball Material: PE Ball
- Diameter: 95mm
- Plug Material: NR
- Pressure: 0.10-1.2 MPa
- Water. Temp: -35ºC to +75ºC
- Flow Rate: 220 (P=0.6 Mpa)
- Length (max): 37.70 cm
- Thread Size: 2 ½” BSP
- Valve Material: ABS
- Ball Material: PE
- Ball Diameter: 95mm
- Plug Material: NR
- Pressure: 0.10-1.2 MPa
- Water. Temp: -35ºC to +75ºC
- Flow Rate: 285 (P=0.6 Mpa)
- Length (max): 38 cm
- Thread Size: 1/2” BSP to 3/4” BSP
- Valve Material: ABS
- Ball Material: PE
- Ball Diameter: 39mm
- Plug Material: NR
- Pressure: 0.1-1.0 MPa
- Water. Temp: 35ºC to +75ºC
- Flow Rate: 4.5 (P=0.6 Mpa)
- Length (max): 18.7cm
- The adjustable screw in the middle of the arm means it can be installed either horizontally or vertically
- All materials used are food grade
- Temperature range from -35ºC to +75ºC
- 1/2” BSP
- Thread Size: 3/8” BSP
- Valve Material: POM
- Ball Material: POM
- Ball Diameter: 38mm to 69mm
- Plug Material: NR
- Pressure: 0.6MPa to 0.8MPa
- Water. Temp: 80ºC
- Flow Rate: 5.0 L.P
- Length (max): 7.5cm to 12.0cm
- Easily used in small water supply equipment which has limited room for an application
- Connected with a special adaptor for rubber pipes- included
- Internal thread 1/4” BSP external thread 1/2” BSP
- Can be fitted with horizontal or vertical inlet
- Allowed fluid densities: 0,95 à 1,05 g/cm
- Cut-out power: 16 (6) A
- Maximum pressure: 3,5 bars
- Maximum temperature: 70 °C
- Protection index: IP 68
- Housing: Copolymer polypropylene
- Type of cable: PVC 3 x 0,75 mm²
- Float weight without cable: 400 g
- Switching angle: 10°
- For non agitated liquids
- Polypropylene casing
- EPDM cable
- Power supply: 12 ... 250 V
- Switching power: 16(6)A
- Ballast integrated in the float
- Dimensions: 140 mm - Ø 70 mm
- Switching angle: +/- 10°
- Allowed fluid density: 0,95 to 1,05
- Power supply: 12, 24, 48 VAC /VCC - 250 VAC /VCC 50/60 Hz
- Cut out power: 16 (6) A (16 A resistive; 6 A inductive)
- Maximum pressure: 3,5 bars
- Allowed temperature: 85 °C
- Allowed fluid densities: 0,80 à 1,10 g/cm³
- Electric characteristics: 250 VCA /VCC 50/60 Hz
- Cut-out power: 20 (8) A
- Maximum pressure: 4 bars
- Maximum temperature: 90 °C
- Protection index: IP 68
- Housing: Copolymer polypropylene + HR HY
- Type of cable: HR HY
- Float weight without cable: 295 g
- Switching angle: 165°
- For heavily agitated liquids
- Polypropylene casing
- EPDM cable
- Power supply: 50 ... 400 V
- Switching power: 20(8)A
- Stainless steel ballast - 230 gr
- Dimensions: 152 mm - Ø 95 mm
- Omni Directional Operation
- Switching angle+/- 110º
- Maximum pressure 3.5 bar
- Allowed Fluid Density 0.70 to 1.15
- 20A resistive - 8A inductive
- 1, 3, 5, 10 and 20m Options
- PVC, PP, PVDF, 316 Wetted Materials
- Tank Measurement up to 10 ft High
- Excellent Chemical Resistance
- Easy Installation
- Two-wire 4-20mA Output
- Epoxy Coated aluminum alloy Junction Box
- 2" NPT Connection
- Suitable for Corrosive Non-Coating Acids Bases
- 5 to 500V AC 15A 1.5kW (2HP)
- Switch Gold Contact Low Wetting Current model available No metal parts in contact with liquids
- 60mm level change on to off or off to on
- Highly reliable magnetic action
- Fully sealed IP67 electrical housing
- M20 cable gland built in
- Australian Made
- High and Low Level Control
- 2 HP 1.5kW 20 AMP 500V S.P.D.T switch
- No metal parts in contact with liquids
- Heavy duty all metal housing
- Weatherproof to IP67
- Super reliable magnetic action
 |
Technical Datasheet |
- Digital Pressure Switch SPDT C/O Contacts
- 20 Bar / 290 PSI pressure rating
- Multi voltage operation
- Powerful 40 Amp solid state drive
- 30 Amp primary pump relay
- Dedicated 16 amp alarm relay
- IP67 rated
|
Technical Datasheet |
- Series: EC
- Sizes: 1/2″ to 2″
- Ends: Socket, Threaded, Flanged or ChemFlareTM
- Seals: EPDM or FKM (Viton®)
- Series: EF
- Sizes: 1/2″ to 3″
- Ends: Socket, Threaded or Flanged
- Seals: EPDM or FKM (Viton®)
- Series: ES
- Sizes: 1/2″ to 4″
- Ends: Socket, Threaded, Flanged or ChemFlareTM
- Seals: EPDM or FKM (Viton®)
- 0 - 500V 15Amp S.P.D.T switch or;
- Low Voltage model also available ('RL' model)
- Polypropylene or 316 Stainless models
- Switches available with 3/4" & 1" BSP & NPT threads
- Manual override built in to all 'F-H' models
- Modular construction
- High pressure 400 Bar 5800 psi models available
- Seal-less magnetic drive
- Weatherproof IP67 housing
- Easily serviceable
- Multi Voltage Operation
- 10 Programmable Timers Built In
- Powerful 40Amp Solid State Drive
- Dedicated 16A Alarm Relay Detachable Electrical Housing
- 18 Bar 261 psi Rated Standard Model
- 200 Bar 2900 psi Model Available
- Suits Pipes 1” & Larger
- Accepts 2 Remote Inputs
- Weatherproof Housing
- Very simple to program
- Multi voltage operation
- Displays pressure and set points
- 15 Programmable timers built in
- Powerful 40 Amp solid state drive
- Dedicated alarm relay
- Detachable electrical housing
- 20 Bar 290 psi Pressure rating
- Suites pipes 25mm (1”) & Larger
- Accepts remote input
- Weatherproof Housing
- All Plastic Construction
- In-Line Design – Insertion Style
- Nema 4X Enclosure
- Corrosion Resistant PP Body + Paddle
- ½” – 12″ Pipe – Tee or Saddle
- Heavy Duty Rugged Design
- Low Pressure Drop
- Easy to Install
- Can be Easily Changed from Normally Open to Normally Closed
- Nominal pipe sizes 15-25 mm
- 1 - 11 l/min switching range
- 1/2” - 1” BSP threaded connections
- Not affected by dirt
- Plastic connection material
- 230Vac/0.5A reed switch
- For 15 mm nominal width
- 0.4-12 l/min switching range
- 1/2” male threads
- Integrated filter
- Plastic wetted parts
- Up to 10 bar pressure
- No external moving parts
- Reliable solid construction
- S.P.D.T three wire switch
- PVC and Polypropylene construction
- Stable repeatable switching action
- No mercury or lead components
- Compact size, 25 mm diameter
- Optional cable weights available
- Stainless steel or thermoplastic
- Built in manual override
- 15 Amp 500 volt S.P.D.T switch
- Unique seal-less coupling
- Weatherproof IP67 housing
- Simple to install
- Fully serviceable
- PP Body – PVC Cable
- NPN, PNP Relay Output
- NEMA 4X
- Adjustable Sensitivity Setting
- PBT Body – PVC Cable
- Indication LED Light
- Works on all Conductive Liquids, Solids
- Mates perfectly with PA1000 Alarm
- All Plastic NEMA 4X Enclosure
- 2″ NPT Threaded Polyethylene Connection
- Light Weight
- Gortex® Breather: Lets Air In, Not Moisture
- Vaporbloc® Technology
- Cable Grip + Cord Grip Included
- Perfect Mate for Levelpro Submersible Sensors
- Full Port
- High Accuracy
- Chemical and Abrasion Resistance
- User Friendly Programming
- 4-20mA, Frequency Pulse, RS 485
- For 6 mm to 20 mm pipe sizes
- Detects low flows from 0.30 litres per hr
- 3/4” BSP unions with PVC push fit
- Vertical Installation only
- No metal wetted parts
- Suitable from 1 to 14 liquid PH level
- Polypropylene float & body material
- External side entry entry fitting level switch
- 1/2″ BSPT (NPT tapered) thread
- N/O or N/C (reversible) contact
- 300 Vac/50VA reed switch
- Low cost Level Switch for OEM applications
|
Technical Datasheet |
- Polypropylene Body & Float (N1)
- Nylon Body & Float (N2)
- External side entry fitting level switch
- 1/2” BSPT (NPT tapered) thread
- N/O or N/C (reversible) contact
- 300Vac/50VA reed switch
- Max Temperature 110 °C
|
Technical Datasheet |
- Nitrile foamed float 20mm Ø
- Max Pressure 15 bar
- Polyacetal top entry stem level switch
- Close on fall contact
- 1/8” BSP thread with nut
- 220Vac/66VA
|
Technical Datasheet |
