Valves, Ball Valves & Butterfly Valves


  • 25mm to 100mm port diameter
  • 1” to 4” BSP connection (flange option)
  • 304 stainless steel
  • Flow rates up to 400 m3/hr
  • Rated up to 17 Bar
  • PTFE and NBR seals
  • Thread Size: 1/2” BSP - 3/4” BSP
  • Valve Material: ABS
  • Ball Material: PE
  • Ball Diameter: 50mm
  • Plug Material: NR
  • Pressure: 0.05-1.0 MPa
  • Water. Temp: -35ºC to +75ºC
  • Flow Rate: 60 (P=0.6Mpa)
  • Length (max): 19.60 cm
  • 10mm to 65mm port diameter
  • 3/8” to 2 1/2” BSP connection
  • All 316 stainless steel
  • Flow rates up to 75,966 litres per hr
  • Rated up to 10 Bar
  • Silcon seal (others available)
  • 10mm to 100mm port diameter
  • DN10 to DN100 flange connection
  • All 316 stainless steel
  • Flow rates over 291,714 litres per hr
  • Rated up to 10 Bar Silcon seal (others available)
  • 10mm to 80mm port diameter
  • 3/8” to 4” BSP connection
  • 304 (100) or 316 (200) stainless steel
  • Flow rates up to 291,714 litres per hr
  • Rated up to 10 Bar
  • Silcon seal (others available)
  • 10mm to 80mm port diameter
  • 3/8” to 4” BSP connection
  • 304 (100) or 316 (200) stainless steel
  • Flow rates up to 291,714 litres per hr
  • Rated up to 10 Bar
  • Silcon seal (others available)
  • Easily used in small water supply equipment which has limited room for an application
  • Connected with a special adaptor for rubber pipes- included
  • Internal thread 1/4” BSP external thread 1/2” BSP
  • Can be fitted with horizontal or vertical inlet
  • 304 Stainless steel valve body
  • Rated up to 10 Bar +100°C.
  • WRAS EPDM/PTFE Seals
  • Power: 5 Watts
  • Duty 100%: 100,000 cycles
  • Width 65.00
  • Height 100.00
  • Length 63.00
  • 304 Stainless steel valve body
  • Rated up to 10 Bar +100°C.
  • WRAS EPDM/PTFE Seals
  • Power: 5 Watts
  • Duty 100%: 100,000 cycles
  • Width 68.00
  • Height 83.00
  • Length 72.00
  • 304 Stainless steel valve body
  • Rated up to 10 Bar +100°C.
  • WRAS EPDM/PTFE Seals
  • Power: 5 Watts
  • Duty 100%: 100,000 cycles
  • Width 68.00
  • Height 110.00
  • Length 81.00
  • Stainless steel valve body
  • Rated up to 10 Bar +90°C.
  • WRAS EPDM/PTFE Seals
  • Duty 100%: 70,000 cycles
  • Width 88.00
  • Height 166.00
  • Length 115.00
  • Stainless steel valve body
  • Rated up to 10 Bar +90°C.
  • WRAS EPDM/PTFE Seals
  • Duty 100%: 70,000 cycles
  • Width 88.00
  • Height 153.00
  • Length 102.00
  • Stainless steel valve body
  • Rated up to 10 Bar +90°C.
  • WRAS EPDM/PTFE Seals
  • Duty 100%: 70,000 cycles
  • Width 88.00
  • Height 185.00
  • Length 130.00
  • 10mm to 65mm port diameter
  • 3/8” to 2 1/2” BSP connection
  • All 316 stainless steel
  • Flow rates up to 79,275 litres per hr
  • Rated up to 10 Bar
  • Silcon seal (others available)
  • Thread Size: 3/8” BSP
  • Valve Material: POM
  • Ball Material: POM
  • Ball Diameter: 38mm to 69mm
  • Plug Material: NR
  • Pressure: 0.6MPa to 0.8MPa
  • Water. Temp: 80ºC
  • Flow Rate: 5.0 L.P
  • Length (max): 7.5cm to 12.0cm
  • Thread Size: 1/2” BSP to 3/4” BSP
  • Valve Material: ABS
  • Ball Material: PE
  • Ball Diameter: 39mm
  • Plug Material: NR
  • Pressure: 0.1-1.0 MPa
  • Water. Temp: 35ºC to +75ºC
  • Flow Rate: 4.5 (P=0.6 Mpa)
  • Length (max): 18.7cm
  • The adjustable screw in the middle of the arm means it can be installed either horizontally or vertically
  • All materials used are food grade
  • Temperature range from -35ºC to +75ºC
  • 1/2” BSP
  • Thread Size: 2 ½” BSP
  • Valve Material: ABS
  • Ball Material: PE
  • Ball Diameter: 95mm
  • Plug Material: NR
  • Pressure: 0.10-1.2 MPa
  • Water. Temp: -35ºC to +75ºC
  • Flow Rate: 285 (P=0.6 Mpa)
  • Length (max): 38 cm
  • Thread Size: 2” BSP
  • Valve Material: ABS
  • Ball Material: PE Ball
  • Diameter: 95mm
  • Plug Material: NR
  • Pressure: 0.10-1.2 MPa
  • Water. Temp: -35ºC to +75ºC
  • Flow Rate: 220 (P=0.6 Mpa)
  • Length (max): 37.70 cm
  • Thread Size: 1 ½“ BSP
  • Valve Material: ABS
  • Ball Material: PE
  • Ball Diameter: 95mm
  • Plug Material: NR Pressure: 0.10-1.2 MPa
  • Water. Temp: -35ºC to +75ºC
  • Flow Rate: 190 (P=0.6 Mpa)
  • Length (max): 37.70 cm
  • Quick stop design, eliminates water hammer
  • Higher flow rate than brass or stainless steel float valves
  • Anti corrosion rust proof, PV resistant, suitable for sea water
  • Adjustable arm can be used in the vertical or horizon water
  • Temperature range from -35ºC to +75ºC
  • Thread Size: 1” BSP to 3/4” BSP
  • Valve Material: ABS
  • Ball Material: PE
  • Ball Diameter: 95mm
  • Plug Material: NR
  • Pressure: 0.05-1.2 MPa
  • Water.Temp: -35ºC to +75ºC
  • Flow Rate: 310 (P=0.6 Mpa)
  • Length (max): 25.50cm
  • Thread Size: 1/4” BSP
  • Valve Material: POM
  • Ball Material: PP
  • Plug Material: SR
  • Pressure: 0.02-0.6 MPa
  • Water. Temp: -30ºC to +75ºC
  • Flow Rate: 1.8 (P=0.6 Mpa)
  • Length (max): 153 mm
  • Thread Size: 1/2” BSP to 3/4” BSP
  • Valve Material: ABS
  • Ball Material: PE Ball Diameter: 95mm
  • Plug Material: NR
  • Pressure: 0.05-1.2MPa
  • Water.Temp: 35ºC to +75ºC
  • Flow Rate: 220 (P=0.6 Mpa)
  • Length (max): 25.50cm
  • Thread Size: 1/2” BSP to 3/4” BSP
  • Valve Material: ABS
  • Ball Material: PE Ball Diameter: 85mm
  • Plug Material: NR
  • Pressure: 0.05-1.2 MPa
  • Water. Temp: -35ºC to +75ºC
  • Flow Rate: 60 (P=0.6 Mpa)
  • Length (max): 28.50 cm
  • Thread Size: 1/4” BSP
  • Valve Material: POM
  • Ball Material: PP
  • Plug Material: SR
  • Pressure: 0.02-0.6 MPa
  • Water. Temp: -30ºC to +75ºC
  • Flow Rate: 1.8 (P=0.6 Mpa)
  • Length (max): 101 mm
  • Thread Size: Int 1/4” BSP, Ext 3/8” BSP
  • Valve Material: POM
  • Ball Material: PP
  • Plug Material: SR
  • Pressure: 0.02-0.6 MPa
  • Water. Temp: -30ºC to +75ºC
  • Flow Rate: 1.8 (P=0.6 Mpa)
  • Length (max): 153 mm
  • Construction: stainless steel. CF8M (316) investment casting.
  • Gas threaded ends DIN 2999.BSP
  • Seats and seals : PTFE + 15% GF o’ring stem: viton . PN 63
  • Temp: -25°+ 180°C.
  • Direct assembling ISO 5211 with locking system.
  • 2 piece(207) or 3 piece(302) versions
  • 1/4” to 4” BSP connections
  • Stainless steel construction
  • Rated up to 63 bar
  • Rated from -25°c - 180°c
  • PTFE seals