ATMI

AQUA MEDIUM

Allowed fluid densities: 0,95 à 1,05 g/cm
Cut-out power: 16 (6) A
Maximum pressure: 3,5 bars
Maximum temperature: 70 °C
Protection index: IP 68
Housing: Copolymer polypropylene
Type of cable: PVC 3 x 0,75 mm²
Float weight without cable: 400 g

ATMI

AQUA MEDIUM EP

Switching angle: 10°
For non agitated liquids
Polypropylene casing
EPDM cable
Power supply: 12 ... 250 V
Switching power: 16(6)A
Ballast integrated in the float
Dimensions: 140 mm - Ø 70 mm

ATMI

AQUA XL

Allowed fluid densities: 0,95 à 1,05 g/cm³
Electric characteristics: 250 VCA 50/60 Hz
Cut-out power: 10 (4) A
Maximum pressure: 2 bars
Maximum temperature: 70 °C
Protection index: IP 68
Housing: Copolymer polypropylene
Type of cable: PVC 3 x 0,75 mm²
Float weight without cable: 775 g

ATMI

AQUA XL EP

Switching angle: +/- 10°
Allowed fluid density: 0,95 to 1,05
Power supply: 12, 24, 48 VAC /VCC - 250 VAC /VCC 50/60 Hz
Cut out power: 16 (6) A (16 A resistive; 6 A inductive)
Maximum pressure: 3,5 bars
Allowed temperature: 85 °C

ATMI

AT 10 B - High Sensitivity Level Control Relay

Supply voltage: 220 V
Sensitivity: High up to 70 KOhm
Operating temperature: - 10 à + 55°C
Number of probes max.: 3
Response time: 100 ms
Electrical charge on contacts: 5A-240V

ATMI

AT 100 A - Multi-application Level Control Relay

Supply voltage: 220 V
Sensitivity: Average of 0 to 10 KOhm
Operating temperature: - 10 à + 55°C
Number of probes max.: 7 Response time: 100 ms
Electrical charge on contacts: 5A-240 V
Power consumption: 10 VA
Probe voltages: 24 VA
Probe weight: 45 g
Dimenssion:72 x 90 X 60 mm

ATMI

AT 120

Switching angle: +/-120°
Allowed fluid density: 0,70 to 1,15
Maximum pressure: 3,5 bars
Allowed temperature: 85 °C
Protection index: IP 68
Housing material: Copolymer
Polypropylene Weight: 195 g

ATMI

AT 120 HR HY (High Resistance HYpalon)

Allowed fluid densities: 0,80 à 1,10 g/cm³
Electric characteristics: 250 VCA /VCC 50/60 Hz
Cut-out power: 20 (8) A
Maximum pressure: 4 bars
Maximum temperature: 90 °C
Protection index: IP 68
Housing: Copolymer polypropylene + HR HY
Type of cable: HR HY
Float weight without cable: 295 g

ATMI

AT 50 A - Variable Sensitivity Level Control Relay

Supply voltage: 220 V
Sensitivity: Modulable up to 100 KOhm
Operating temperature: - 10 à + 55°C
Number of probes max.: 3
Response time: 100 ms
Electrical charge on contacts: 5A-240V

ATMI

AT A - Low Sensitivity Level Control Relay

Supply voltage: 220 V
Sensitivity: Normal 0 to 5.6 KOhm
Operating temperature: - 10 à + 55°C
Number of probes max.: 3
Response time: 100 ms
Electrical charge on contacts: 5A-240 V
Power consumption:3 VA Probe voltages: 10V
Probe weight: 45 g
Dimenssion:53 x 95 X 58 mm

ATMI

ATS 165

Switching angle: +/-165°
Allowed fluid density: 0,70 to 1,10
Maximum pressure: 3,5 bars
Allowed temperature: 85 °C
Protection index: IP 68
Housing material: Copolymer Polypropylene
Weight: 325 g

ATMI

ATS 165 EP

Switching angle: 165°
For heavily agitated liquids
Polypropylene casing
EPDM cable
Power supply: 50 ... 400 V
Switching power: 20(8)A
Stainless steel ballast - 230 gr
Dimensions: 152 mm - Ø 95 mm

ATMI

BIP ECO

Switching angle: +/-100°
Allowed fluid density: 0,70 to 1,15
Power supply: 250 VAC/VDC 50/60 Hz
Maximum pressure: 3,5 bars
Allowed temperature: 70 °C
Protection index: IP 68
Weight: 105 g

ATMI

BIP STOP Float Level Switch

Omni Directional Operation
Switching angle+/- 110º
Maximum pressure 3.5 bar
Allowed Fluid Density 0.70 to 1.15
20A resistive - 8A inductive
1, 3, 5, 10 and 20m Options

ATMI

Cable Hanger For Float Level Switches

Important specification: Avoids the deterioration of the cable
Maximum temperature: 85°C
Housing: Polyamide
Weight: 25 g

External Ballasts For Soliba Tilt Level Switches - PVL

ATMI

External Ballasts For Soliba Tilt Level Switches

ATMI

PIEZO AS (Wastewater)

Temperature compensation: 0 ... + 40°C
Output signal: 4/20mA
Electric characteristics: 8 - 36 VDC
Hystérésis: 0,05%
Type of cable: PU

ATMI

PIEZO ST (Clean water)

Output signal: 4/20mA
Electric characteristics: 8 - 36 VDC
Hystérésis: 0,05%
Type of cable: PU

ATMI

Pulse Isolator 5202b For Atex Certified Equipment

2 channels – 2 outputs
Cable error detection
Up to SIL 3 in accordance with CEI 61508
Input from area 0 (Area 20), safe in installation or in Area 2.
Galvanic isolation of 3 ports of the circuit, input, outputm, power
Installation on a DIN rail, with or without Power Bus.
Power supply 24 Vdc (18 to 30 Vdc)

ATMI

SOBA EP

Switching angle: 25°
For lightly agitated liquids
Polypropylene casing
EPDM cable
Power supply: 12 ... 250 V
Switching power: 16(6)A
Stainless steel ballast - 230 gr
Dimensions: 170 mm - Ø 80 mm

ATMI

SOBA EP Float Level Switch

Allowed fluid densities: 0,70 à 1,15 g/cm³
Electric characteristics: 12,24,48 VCA /VCC - 250 VCA - 50/60 Hz
Cut-out power: 16 (6) A Maximum pressure: 3,5 bars
Maximum temperature: 85 °C
Protection index: IP 68

ATMI

SOBA EX Float Level Switch

Omni Directional Operation
Switching angle+/- 25º
Maximum pressure 4 bar
Allowed Fluid Density 0.70 to 1.15
16A resistive - 6A inductive
5, 10, 13, 15, 20, 25 and 30m Options

ATMI

SOBA Float Level Switch

Omni Directional Operation
Switching angle+/- 25º
Maximum pressure 3.5 bar
Allowed Fluid Density 0.70 to 1.15
16A resistive - 6A inductive
5, 6, 10, 13, 15, 20 and 25 m Options

Technical Datasheet

ATMI

SOBA HR HY Float Level Switch

Aggressive liquids : acids, solvents, corrosive liquids, hydrocarbons, sea water, etc.
Level control of multiple pumps
Emptying / Filling function
Overflow or dry-running protection
High / low level alarm

ATMI

SOBA SMALL Float Level Switch

Clear, clean liquids, rain water
Wastewater, sewage water, charged liquids
Slightly aggressive liquids (oils, mud, paint, etc.) and more aggressive liquids if equipped with a HR HY cable
Level control of multiple pumps
Overflow or dry-running protection
High / low level alarm