Products
- 304 Stainless steel valve body
- Rated up to 10 Bar +100°C.
- WRAS EPDM/PTFE Seals
- Power: 5 Watts
- Duty 100%: 100,000 cycles
- Width 65.00
- Height 100.00
- Length 63.00
- Corrosive Chemicals, Acids, Bases
- Integral Weight, Eliminates Floating
- Ceramic Sensing Diaphragm
- High Accuracy
- Non Clogging Design
- PTFE Teflon ® Jacketed Cable Excellent for Foam, Vapor, Condensate
- Heavy Duty Rugged Design
- No Moving Parts
- Automatic Temperature Compensation
- Stainless steel valve body
- Rated up to 10 Bar +90°C.
- WRAS EPDM/PTFE Seals
- Duty 100%: 70,000 cycles
- Width 88.00
- Height 166.00
- Length 115.00
- Stainless steel valve body
- Rated up to 10 Bar +90°C.
- WRAS EPDM/PTFE Seals
- Duty 100%: 70,000 cycles
- Width 88.00
- Height 153.00
- Length 102.00
- 304 Stainless steel valve body
- Rated up to 10 Bar +100°C.
- WRAS EPDM/PTFE Seals
- Power: 5 Watts
- Duty 100%: 100,000 cycles
- Width 68.00
- Height 110.00
- Length 81.00
- Const. stainless steel. CF8M ( 316) investment casting.
- Gas threaded ends DIN 2999.BSP
- Seats and seals : PTFE + 15% GF o’ring stem: viton . PN 63
- Temp: -25°+ 180°C.
- Manually operated by handle with locking system
- Capacitive Ceramic Sensing Diaphragm
- FFKM Kalrez® O-Ring Seals
- Integral Weight Eliminates Floating
- Excellent Long Term Stability
- Lower Temperatures, -40°F
- Flush Sensor, Non Clogging Design
- Heavy Duty PTFE Teflon ® Cable
- Excellent for Foam, Vapor, Condensate
- 2X Higher Accuracy than Piezo Ceramic
- 99.9% Al 2 0 3, Superior Chemical Resistance
- Zero Hysteresis, Rapid Response
- Version: DIN FORM B
- Wiring: Without Circuit
- LED display: No
- Cable cross-section: 1.5 mm²
- Rated voltage: 250 V
- Pin number: 2 pole + PE
- Degree of protection (IP): IP65
- Type of locking: Central Screw
- Stainless steel valve body
- Rated up to 10 Bar +90°C.
- WRAS EPDM/PTFE Seals
- Duty 100%: 70,000 cycles
- Width 88.00
- Height 185.00
- Length 130.00
- Const.stainless steel.CF8M (316) investment casting.
- Gas threaded ends DIN 2999.BSP
- Seats and seals: PTFE + 15% GF o’ring stem: viton . PN 63 Temp: -25°+ 180°C
- Direct assembling ISO 5211 with locking system.
- 304 Stainless steel valve body
- Rated up to 10 Bar +100°C.
- WRAS EPDM/PTFE Seals
- Power: 5 Watts
- Duty 100%: 100,000 cycles
- Width 68.00
- Height 83.00
- Length 72.00
- Acids, Bases
- 316L SS Sensing Diaphragm
- High Accuracy
- Non Clogging Design
- PTFE Teflon® Jacketed Cable or PUR Cable
- Excellent for Foam, Vapor, Condensate
- Heavy Duty Rugged Design
- No Moving Parts
- Automatic Temperature Compensation
- All wetted parts 17-4 PH Stainless Steel
- Minimum IP rating of IP65 in accordance with BS EN 60529:1992.
- Frequency Response: <1ms for Conditioned Outputs
- Maximum Current Draw : 2-wire Transmitter = 20mA, Transducer in voltage mode = 4.5 mA
- EMC Data: Meets the requirements of CE.
