FLUKE

Fluke Corporation is the global leader in professional electronic test tools and software designed for precise measurement and condition monitoring. Renowned for their portability, safety features, user-friendly interfaces, accuracy, and unwavering commitment to quality standards, Fluke tools consistently set the benchmark in the industry.


  • Rugged, reliable basic True-RMS clamp meter
  • Measures AC current to 400 A
  • Measures AC voltage and DC voltage to 600 V
  • Provides True RMS AC voltage and current
  • Measures resistance to 4 kΩ with continuity detection
  • VCHEK™ LoZ low impedance measurement function
  • Large backlit display
  • CAT IV 600 V safety rated
  • Low impedance voltage function for eliminating ghost voltages.
  • Low Pass filter for accurate voltage and frequency measurements.
  • Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current.
  • A completely sealed, IP67 rated case
  • Dustproof per IEC60529 IP6x and waterproof per IEC60529 IPx7
  • Meets IEC/EN Overvoltage Electrical Safety Standard No. 61010-1:2001
  • Tests voltage and frequency
  • Checks wiring polarity to detect broken N wires
  • Measures insulation resistance and loop and line resistance
  • Measures motor windings with continuity test
  • Calculates prospective earth fault current (PEFC/IK)  
  • Prospective short-circuit current (PSC/IK)
  • Bright 7" high resolution LCD touch screen
  • High Definition, dual view imaging probe
  • Variety of rugged and high-resolution accessory probes
  • Improved battery charging and management
  • Macro to micro zoom
  • Up-is-Up™ technology f
  • Fluke Connect™ support

  • Do more with the same air compressors
  • Ensure proper air pressure to your pneumatic equipment
  • Lower utility costs
  • Reduce leak detection time
  • Improve reliability in your production line
  • LeakQ Report Generator

  • New: MecQ™ mechanical scanning
  • Leak rate and cost indication on the go
  • Partial Discharge classification on the go
  • Online CO2 emission reporting
  • Reduce outages and increase uptime
  • Cut costs and save energy everyday by finding and fixing
  • PD PDQ Mode™ to capture and analyse partial discharge

  • 320 x 240 resolution
  • 2 meter drop test
  • LaserSharp™ Auto Focus
  • Manual or automatic focus
  • Measure up to 650 °C
  • Subject to Export Control

  • Streaming thermal image capture and analysis
  • MATLAB and LabVIEW software compatibility
  • 640 x 480 resolution  
  • 2x and 4x telephoto, macro and wide angle

  • Streaming thermal image capture and analysis
  • MATLAB and LabVIEW software compatibility
  • 320 x 240 resolution    
  • 2x and 4x telephoto, macro and wide angle

  • Rugged, superbly engineered 640 x 480 thermal imaging camera
  • Large 5.7-inch responsive LCD touchscreen with 150% more viewing area
  • Features 240° rotating screen for unmatched shooting flexibility
  • Provides 4x the pixel data with on-camera SuperResolution
  • Create a 1280 x 960 resolution image    
  • Subject to Export Control

  • Increased sensitivity to visualise temperature differences    
  • Easier to visualise and diagnose issues
  • Intuitive visual interface, improved, user-tested, touch screen interface    
  • Visualise target, tiny-to-large with interchangeable smart lenses
  • 2x and 4x telephoto, wide angle and macro lens compatibility

  • Continuous touchscreen IR-Fusion™
  • 16 hours battery life
  • Can withstand drop up to 2 meter
  • Water and dust resistant—IP54 enclosure rating
  • 120 x 90 infrared resolution

  • 320 x 240 resolution
  • 2 meter drop test
  • IR Fusion™ technology for context
  • Fixed focus
  • Measure up to 400 °C
  • Subject to Export Control

  • 256 x 192 infrared resolution
  • Asset Tagging
  • Touchscreen IR Fusion™
  • Manual and fixed focus
  • Measure up to 550 °C
  • Engineered to withstand 2 meter drop

  • 384 x 288 infrared resolution
  • Asset Tagging
  • Touchscreen IR Fusion™
  • IS3 and AVI video recording    
  • Measure up to 550 °C    
  • Dew-point calculation

  • Current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
  • Increases productivity with manual and automatic ranging
  • Display Hold, Auto Hold, and Min/Max-average recording

  • Rugged, compact advanced insulation resistance tester
  • Automatically calculates Polarization Index and Dielectric Absorption Ratio
  • Makes repetitive tests simple and easy with a Compare (Pass/Fail) function
  • Offers multiple insulation test voltages: 50 V, 100 V, 250 V, 500 V, and 1000 V

  • Includes "Insulation Pre-test"
  • Runs seven installation tests automatically
  • Allows you to share test results in real time
  • 6 mA RDC-DD testing for EV charging stations

  • Safety rated CAT III 1000 V, CAT IV 600 V
  • Measures AC and DC voltage to 1000 V
  • True-RMS AC current and voltage

  • Designed according to IEC EN 61243-3:2014 
  • CAT IV 600 V, CAT III 690 V safety rating
  • Redesigned cable assembly for superb reliability on the job
  • LED indicator, LCD display, audible tone or tactile feedback

  • Prevent false readings caused by ghost voltage    
  • AutoVolt automatic AC/DC voltage selection    
  • Large white LED backlight

  • Compact and rugged: designed for portability
  • Measure AC and DC voltage up to 1000 V
  • Measure current up to 100 A
  • Integrated protection circuit
  • Troubleshoot resistance problems up to 1000 Ω

  • Easy to Use: this circuit tester has large, easy-to-use buttons
  • Designed according to IEC EN 61243-3:2014 to verify the absence of voltage – even with discharged batteries
  • CAT IV 600 V, CAT III 690 V safety rating

  • No need to open covers or remove wire nut
  • Simultaneously measure voltage and current    
  • 17.8 mm open fork is widest in the industry
  • Measure up to 200 A on 4/0 wires (120 mm2)

  • 3.5” LCD touchscreen display for easy troubleshooting
  • -20 °C to +400 °C temperature measurement range
  • Six colour palettes
  • Can withstand drop up to 1 meter
  • IP 54 enclosure rating
  • Subject to Export Control

  • True-rms AC/DC current, voltage, temperature, frequency
  • Clamp meter, test leads, K-type thermocouple and soft case
  • Versatile tool performs most front-line measurement tasks

  • Automatically measure AC and DC voltage up to 600 V
  • Measure current up to 100 A without breaking the circuit with OpenJaw™ design
  • Troubleshoot resistance problems up to 1000 Ω
  • Work in tight spaces with detachable Slim Reach probe tips

  • Continuous self-test so you always know it’s working
  • Voltage detection range: - 90 V to 1000 V AC or 200 V to 1000 V AC
  • Volt stick with Audible/Silent mode for added convenience

  • Complete pressure, temperature, and mA loop calibrator
  • Troubleshoot and calibrate HART smart digital transmitters
  • Create calibration procedures and automatically document results
  • Connect to calibration management software

  • Full-featured documenting process calibrator
  • Measures volts, mA, RTDs, thermocouples, frequency,
  • Sources and simulate volts, mA, pressure, thermocouples, RTDs

  • Safer and rugged: Safety rated CAT III 1000 V, CAT IV 600 V
  • Accurate: Measure current, voltage and frequency
  • Save time: Built-in thermometer and temperature probe    
  • True-RMS AC voltage and current for measuring non-linear signals

  • Built-in thermometer 
  • Accurate true-RMS AC current and voltage
  • Increases productivity with manual and automatic ranging

  • Ideal for quick verifications and field service
  • Min/Max/Average to record signal fluctuations
  • CAT III 600V

  • Non-contact voltage detection
  • AutoVolt automatic AC/DC voltage selection
  • Prevent false readings caused by ghost voltage