Euroswitch
- Medium: Oil -Air
- Case: Brass (AISI optional)
- Working temperature range: -20°C / +80°C
- Measuring ranges (Differential pressure) 2 ÷10 bar
- Mechanical working life: 105 cycles
- Max working pressure: 350 ÷ 450 bar depending on the thread
- Thread: 1/2” Gas (others on request)
- Tightening torque: 50-70 Nm
- Connector: M12 x 5 PIN
- Protection degree: IP67
- Weight ~ 140 g
Technical Datasheet |
- IO-Link Differential Pressure Transmitter IO-Link & 2 PNP Contacts
- 2-10 bar
- Working temperature range -20°C to +80°C
- 1/2” thread
- Brass body
- Use: Water - Mineral oils - Diesel fuel - Petrol
- Fixing: 1" gas AISI 304 (stainless steel on request)
- Output signals: 4-20 mA ANALOG
Technical Datasheet |
- For water, mineral, oils, diesel & petrol
- 4-20mA analogue
- Built in temperature sensor
- IO-Link Communication System
- 4 setting points
- New illuminated differential indicator
Technical Datasheet |
- Electronic Pressure Transducer
- 4-20mA transducer
- 0-400 bar measuring ranges
- Over-pressures up to 650 bar
- M12 electrical connector
- 1/4” BSP standard thread
- 316L stainless steel
ESP Technical Datasheet |
- Sensor: Ceramic Element
- Response Time: ≤ 4 ms
- Tightening Torque: 30 Nm
- Protection Degree: IP 67
- Supply Voltage: 8÷30 Vdc
- Current Consumption: ≤ 25 mA
- Temperature Ranges: 0÷80°C, -20÷80°C
- Life expectancy: > 10 million cycles
- Weight: 86g
Technical Datasheet |
- Output signal: analogic 4-20mA
- Supply voltage: 8-30V
- Case: AISI 316
- Working temperature: -20 / +95° C
- Protection degree: IP65 / IP67
- Electrical connection: M12
- Max Torque: 50 Nm
- Output signal: IO-Link
- Supply voltage: 24±10%
- Case: AISI 316
- Working temperature: -20 / +95° C
- Protection degree: IP65 / IP67
- Electrical connection: M12
- Temperature output signal: analogic 4-20mA (+/-1°C)
- Supply voltage: 24 V +/- 10%
- Float: NBR
- Working temperature: -25 / +95° C
- Protection degree: IP65 / IP67
- Use Mineral oils: Fuels
- Type of contact: Reed SPST/SPDT
- Max switch. capacity: 80 W (50W SPDT)
- Max switch. current: 1 A
- Max switch. voltage: 250 Vac (220 Vac SPDT)
- Fluid specific weight: > 0,85 with L max
- Working temperature: -15°C/+100°C
- Weight ~ gr 145
- Use: Water - Mineral oils - Diesel fuel - Petrol
- Fixing: Al 1" gas (Aisi 304 Stainless Steel on request)
- Stem: Steel
- Float: NBR
- Seeger: AISI 316
- 0-Ring: NBR
- Electrical connection: Box aluminum (M12 connector on request)
- Protection degree: IP65
- Fluid specific weight: >0,6
- Working temperature: -10°C/+80°C
- Pitch (Resolution): 10/20 mm
- Output signal: Analogic 4-20 mA Separate for level / temperature
- Length: Lmin = 100 mm Lmax = 2.000 mm
Downloads
Technical Datasheet |
- Max switched voltage: 24 Vcc
- Resistive load: 21 (12 Vdc)VA
- Max fluid temperature: 80°C
- Overpressure limit: 350 bar
- Intervention point: 2.5 - 5.5bar 0.5 -3.5 bar
- Action type: 1B
- Diaphragm: EPDM CH (brake liquid), NBR (Idraulic oil)
- Electrical connections: Wired on request
- Pressure Switch ≤ 250V
- SPDT C/O Contacts
- Up to 400 bar adjustment ranges
- Over-pressures up to 800 bar
- Max working pressures up to 450 bar
- 1/4” BSP male/female thread options
- Viton seal (others available)
- DIN43650 / cable options
Model 24 Technical Datasheet |
Model 24C Technical Datasheet |
Model 24F Technical Datasheet |
- High Amp Pressure Switch ≤ 48V
- N/O or N/C Contacts Up to 10 bar adjustment ranges
- Max over-pressure 50 bar
- Max working pressures up to 20 bar
- 1/4” BSP thread (others available)
- NBR seal (others Available)
- Max current up to 5 amps
Model 25R Datasheet |
Model 25D Datasheet |
- Pressure Switch ≤ 250V
- SPDT C/O Contacts
- Up to 300 bar adjustment ranges
- Over-pressures up to 800 bar
- Max working pressures up to 450 bar
- 1/4” BSP thread (others available)
- Viton / NBR+Teflon Seal (Model 28N)
- Adjustable Hysterisis (10-50%)
Model 27N Technical Datasheet |
Model 28N Technical Datasheet |
- Piston Pressure Switch ≤ 250V
- N/O or N/C Contacts
- Up to 300 bar adjustment ranges
- Over-pressures up to 800 bar
- Max working pressures up to 450 bar
- 1/4” BSP thread (others available)
- NBR+Teflon piston seal
- Steel or stainless steel body
Technical Datasheet |
- Diaphragm Pressure Switch ≤ 250V
- N/O or N/C Contacts
- Up to 50 bar adjustment ranges
- Over-pressures up to 300 bar
- Max working pressures up to 150 bar
- 1/4” BSP thread (others available)
- Viton seal (others available)
- ATEX option available
Technical Datasheet |
- Case Brass: (on request Stainless Steel )
- Electric contacts: Silver AgNi, on request gold plated
- Electrical connection: N.O. (White ) N.C. (Brown )
- Max switch voltage: 48V ac / dc
- Max switch current: 0,5A
- Max fluid temperature: 80°-120°C (depending on diaphragm)
- Max Overpressure limit: 15 bar
- Max Working pressure: 10 bar
- Weight ~ 70 gr
Technical Datasheet |
- Case Brass: (on request Stainless Steel)
- Electric contacts: Silver AgNi, on request gold plated
- Electrical connection: N.O. (White ) N.C. (Brown )
- Max switch voltage: 48V ac / dc
- Max switch current: 0,5A
- Max fluid temperature: 80°-120°C (depending on diaphragm)
- Max Overpressure limit: 35 bar
- Max Working pressure: 25 bars
- Protection degree IP00 with cover 3015010 IP54
- Weight ~ 90 gr
Technical Datasheet |
- Vacuum Switch ≤ 250V
- NO or NC Contacts
- -200 / -900 mbar adjustment range
- Over-pressures up to 35 bar
- Max working pressures up to 25 bar
- 1/4” BSP thread (others available)
- NBR seal or CR seal
- ATEX option available
Technical Datasheet |
- Case: Brass
- Electric Contacts: Silver
- Max Fluid Temperature: 80° to 120°c
- Max Overpressure Limit: 15 bar 15 bar
- Max Working Pressure: 10 bar 2,5 bar
- Vacuum Switch ≤ 250V SPDT CO Contacts
- -200 / - 900 mbar adjustment ranges
- Over-pressures up to 15 bar
- Max working pressures up to 10 bar
- 1/4” BSP thread (others available)
- NBR seal or CR seal
- Brass body
Technical Datasheet |
- Piston Pressure Switch ≤ 48V
- N/O or N/C Contacts
- Up to 300 bar adjustment ranges
- Over-pressures up to 800 bar
- Max working pressures up to 450 bar
- 1/4” BSP thread (others available)
- NBR+Teflon piston seal
- Steel or stainless steel body
Technical Datasheet |
- Diaphragm Pressure Switch ≤ 48V
- N/O or N/C Contacts
- Up to 50 bar adjustment ranges
- Over-pressures up to 300 bar
- Max working pressures up to 150 bar
- 1/4” BSP thread (others available)
- Viton seal (others available)
- Brass, steel or stainless steel body
Model 41 Technical Datasheet |
Model 41B/C Technical Datasheet |
Model 41V Technical Datasheet |
- Diaphragm Pressure Switch ≤ 48V
- Female Thread N/O or N/C Contacts
- Up to 50 bar adjustment ranges
- Over-pressures up to 300 bar
- Max working pressures up to 150 bar
- 1/4” BSP female (others available)
- Viton seal (others available)
- Brass, steel or stainless steel body
Technical Datasheet |
- Piston Pressure Switch ≤ 250V
- SPDT C/O Contacts
- Up to 400 bar adjustment ranges
- Over-pressures up to 900 bar
- Max working pressures up to 450 bar
- 1/4” BSP thread (others available)
- NBR+Teflon piston seal
- ATEX option available
Technical Datasheet |
- Diaphragm Pressure Switch ≤ 250V
- SPDT C/O Contacts
- Up to 60 bar adjustment ranges
- Over-pressures up to 300 bar
- Max working pressures up to 150 bar
- 1/4” BSP thread (others available)
- Viton seal (others available)
- ATEX option available
Technical Datasheet |
- 25°C-110°C Set Points (5° increments)
- Max temperature 120°C
- Switch rating up to 250V
- 1/2” or 3/8” BSP thread(others available)
- Brass construction (stainless option)
- ATEX option available
- 35°C-85°C Set Points (5° increments)
- Max temperature 85°C
- Switch rating up to 250V
- 1/2” or 3/8” BSP thread(others available)
- Brass construction (stainless option)
- ATEX option available
- Electrical connection: PVC cable (others on request)
- Coat: moulded resin
- Working temperature: -20 / +120 ° C (others on request)
- Protection degree: IP65 - IP67
- Case: brass - stainless steel - bronze
- Working temperature: -20 / +120 °C (others on request)
- Protection degree: IP65 - IP67
- Thermistor Coat: resin
- Case: brass (on request stainless steel)
- Working temperature: -20 + 120°C
- Connector: IP65
- Pressure Switch with Visual Scale
- SPST N/O Contacts
- Up to 6 bar adjustment ranges
- Max over-pressure 20 bar
- Switch rating 48V
- Air only
- Electrical cable (Model. 681)
- DIN43650 (Model. 682)
681 Technical Datasheet |
682 Technical Datasheet |
- Pressure Switch with Adjustment Knob
- SPDT C/O Contacts
- Up to 400 bar adjustment ranges
- Max over-pressure 900 bar
- Up to ≤ 250V / DIN43650
- Manifold / 1/4” BSP female (ES-692)
- NBR+Teflon seal
- ± 2% Tolerance across the range
691 Technical Datasheet |
692 Technical Datasheet |
- Max switches voltage: 48 V ac / dc
- Max switches current: 0,5 A Action type: 1B
- Max working pressure: 350 ÷ 450 bar (depending on the thread)
- Tightening torque: 50-70 Nm
- Protection degree: IP 00 (see pages 18-20 for protection caps and connectors)
- Weight: ~ 120 g
- Medium: Oil - Air
- Case: Brass
- Electric contact: Silver
- Max fluid temperature: 100°C Electrical conditions: N.O. - N.C.
- Max switches voltage: 48 V ac / dc
- Max switches current: 0,5 A
- Action type: 1B Max working pressure: 350 ÷ 450 bar (depending on the thread)
- Thread: 1/2” Gas standard (others on request)
- Tightening torque: 50-70 Nm
- Protection degree: IP 00 (see pages 18-20 for protection caps and connectors)
- Weight ~ 120 g
Technical Datasheet |
- Medium: Oil - Air
- Case: Brass Electric contact:
- Silver Max fluid temperature: 100°C - UL/CSA version 85°C
- Electrical conditions: SPDT (exchange contact)
- Max working pressure: 450 bar 350 bar depending on the thread
- Thread: 1/2” Gas standard (others on request)
- Tightening torque: 50-70 Nm
- Protection degree: IP65 with connector according to UNI EN 175301-803 (DIN43650)
- Approx. weight ~ 160 g
Technical Datasheet |
- Working fluid: Oil
- Case: Brass
- Cap: high performance Polyamid
- Visual signal: White/Red
- Thread (X3) M20x1,5 (other on request)
- Ambient temperature: -25°C / +85°C
- Fluid temperature: -10°C / +85°C
- Max working pressure: 350 ÷ 450 bar depending on the thread
- Action type: magnetic
- External pollution situation: grade 2
- Tightening torque max: 35 Nm
- Operating speed: 10 bar / 15 sec.
- Weight ~ 150 gr
- Medium: Oil -Air
- Case: Brass (AISI on request)
- Working temperature range: -20°C ÷ +80°C
- Measuring ranges (Differential pressure): 2 ÷10 bar
- Max working pressure: 350 ÷ 450 bar (350 UL CSA version) depending on the thread
- Thread: 1/2” Gas (others on request)
- Tightening torque: 50-70 Nm
- Connector: M12 x 5 PIN
- Protection degree: IP67
- Weight ~ 140 g
- Max switch. capacity: 40 W - (3 W SPDT)
- Max switch. current: 50 V (250V on request)
- Specific fluid weight: > 0,75
- Working temperature: - 10°C / +80°C Weight: ~ gr 20
- Max switch. capacity: 10 W
- Max switch. current: 0,5 A
- Max switch. voltage: 50 V
- Specific liquid weight: > 0,7
- Working temperature: - -10°C/+100°C
- Weight: ~ 50 gr
- Max switch. capacity: 40 W - (3W SPDT)
- Max switch. current: 1 A - (0,25A SPDT)
- Max switch. voltage: 50 V
- Protection degree: IP 65
- Specific liquid weight: > 0,75
- Working temperature: -10°C / +80°C
- Lengths: L1 on request
- Nylon or NBR Float
- Adjustable length to 1000 mm
- NO/NC or SPDT Reed Switch
- Temperature Switch Option (PKT)
- IP65 with Din Connector Flange or 1” BSP Options
Technical Datasheet |
- Nylon or NBR Float
- Adjustable length to 1000 mm
- NO/NC or SPDT Reed Switch
- Temperature Switch Option (PKT)
- IP65 with Din Connector Flange or 1” BSP Options
Technical Datasheet |
- 15-minute level switch - Simple to assemble
- 1" BSP
- N/O or N/C contacts
- Stainless steel option (call for details)
- Ideal for hydraulic & water applications
- Integral temperature switch option
- Operating temperature (-5°C to +45°C)
- Storage temperature (-25°C to +50°C)
- Protection degree IP20
- Kit weight 270 g
- Dimensions of ABS crate 112x62x32mm WxHxD
SCD 4.0 Sensor Configuration Device |
SCD 4.0 Manual |