Dinel
- For continuous level measurement of liquid and bulk-solid materials
- Direct mounting into containers, silos, vessels,basins, reservoirs, etc
- Variants with rope electrode or with coated electrode for aggressive and electrically conductive medium
- Possibility of linear measurements even in nonconductive and differently shaped vessels
- Variants for usage in explosive areas, high temperature performance
- Current (4 ... 20 mA) or voltage (0 ... 10 V) output
 |
Technical Datasheet |
- Direct tank mounting with flange
- Electrode length from 0.1 m to 1 m
- 4-20 mA or 0-10 V output
- Easy Install with no settings required
- IP68 rating
- Housing & rod stainless steel
|
Technical Datasheet |
- For continuous level measurement of liquids and bulk solids
- Wide range of applications
- Real-time data measurement
- 4-20mA analogue output
- Two-way HART Communication
|
Technical Datasheet |
- Limit Level Sensor for Various Liquids
- Conductive / Non-Conductive Fluids
- Suitable for High Temperatures
- 1/2” BSP thread (Others Available)
- Easily Adjustable Sensitivity
- ATEX versions available
|
Technical Datasheet |
- Level Detection for Wells / Boreholes
- Maximum Immersion Depth 100m
- 2 Wire Output to Relay or Control Unit
- 2m Cable (Longer Available)
- Stainless Steel Removable Basket
- IP68 Protection
|
Technical Datasheet |
- Detect liquids in glass or plastic pipes, indicate liquids in inter-coat space of double coated tanks
- Adjustable sensitivity
- NPN, PNP or NAMUR output
- Material of housing and nut from stainless steel
- Version for usage in explosive areas
- LED state indication
|
Technical Datasheet |
- Optical indication of the flow rate and temperature status
- 1x current output 4..20 mA and 1x limit PNP output
- Settings provided by magnetic pen
- Stainless steel case
- For continuous level measurement of liquids or bulk solids
- Wide spectrum of use, direct mounting into tanks, vessels, sumps or silos and hoppers
- Setting using a magnetic pen without the need for complete emptying of the tank
- Possibility of linear measurement even in non-conductive or variously shaped vessels
- Optical indication of function and status of level meter by two LEDs
- Wide selection of electrical connection: connector or cable glands
- Housing, electrodes and reference tubes made from stainless steel
- Variants with coated electrode for aggressive or electrically conductive media
|
Technical Datasheet |
- For limit level sensing of liquid, and bulk-solid and powder materials
- Universal using (bulk solids, liquids, aggressive materials, petroleum products etc.)
- Direct mounting into various containers, silos, vessels, tanks, filling inlets, reservoirs, etc.
- Sensitivity and hysteresis fluently adjustable
- Output types NPN, PNP, NAMUR
|
Technical Datasheet |
- Universal use for limit level sensing of liquids and bulk solids
- Direct mounting into tanks, vessels, sumps and tubes or silos and hoppers
- Setting using a magnetic pen
- Mode for quick sensor setting without the presence of medium
- Optical indication by two LEDs
- Wide selection of connections: connector or cable glands
- Housing, electrodes and reference tubes made from stainless steel
- High stability upon high sensitivity (possible to use for materials with εr ≥ 1.3)
|
Technical Datasheet |
- Supply voltage: 6 ... 30 V DC
- Current consumption (idle-circuit condition): max. 0.6 mA
- Switched current (min. / max.): 3.3 / 40 mA
- Residual voltage in the closed state: max. 6 V
- Max. switching frequency: 1 Hz
- Ambient temperature range: -20 ... +70 °C
- Diameter of the vessel for the attachment of the sensor: min. 300 mm
- Protection class IP 67
- Housing material: polyurethane
- Type of connection cable: PUR 3 x 0.14 mm2
- Weight (including 2m cable): about 40 g
- Weight (without cable): 10 g
|
Technical Datasheet |
- Level Sensing through 8mm Glass/Plastic
- 2 or 3 Wire Connections
- Simple Setup in Miniature Form Switch
- Max Switching Current 40mA(PNP 100mA)
- Temperature range of -20 to 80 °C
- IP67 Rated
|
Technical Datasheet |
- Radar level meter with guided wave
- 4 ... 20 mA, HART® output
- Liquid, mush & bulk-solid materials
- Suitable with aggressive liquids
- Measuring range up to 40m
- ATEX options available
|
Technical Datasheet |
- The RFLS-53 uses the principle of high-frequency capacitive measurement.
- It responds to the mass of the material and ignores deposits and material residues on the measuring part.
- For demanding applications to indicate powder, dust and hygroscopic materials.
- The sensor is available in several versions with different types of outputs and electrical connections.
- The RFLS-53 fully replaces the older CLS-53, its electrical connection is different for the 230 VAC version (3 wires).
- For continuous level measurement of clean, lightly soiled water
- Precise measurement range up to 100 m (H2O)
- The health certificate for contact with potable water available
- Current or Voltage output
- Easy "plug and play" installation without any settings
|
Technical Datasheet |
- 4 to 20mA or 0-10V Output
- 0.5 % Accuracy
- Immersion Depth Up to 100m
- 10cm Step Configurations
- Fully Stainless Steel
- Over Voltage Protection
|
Technical Datasheet |
- Precise customer choice of the measurement range up to 100 m (H2O)
- Current or Voltage output
- Easy “plug and play” installation without any settings
|
Technical Datasheet |
- High long-term stability
- Accuracy 0,5% within the total range
- Measuring range up to 100 m (H2O)
- Thread process connection
- Current or voltage output
- LED indicators
|
Technical Datasheet |
- High frequency limit level sensors
- For reliable limit level sensing of a variety of fluids
- ‘Medium Window’ function
- High stability at high sensitivity
- Adjustment with the magnetic pen
- Max output 300mA
|
Technical Datasheet |
- Limit Level Sensor for Viscous Liquids
- Resistant to Adhesion of Sticky Media
- Conductive / Non-Conductive Fluids
- 1/2” BSP thread
- Media Recognition Settings
- Highly Sensitive and Reliable
|
Technical Datasheet |
- Non Contact Level Measurement
- Current, Voltage or Modbus Outputs
- Easy Adjustment and Setup
- Various Threads and Flange Options
- Up to 20M Measurement Range
- ATEX options available
|
Technical Datasheet |
- LED with Modifiable Display Units
- Current, Voltage or Modbus Outputs
- D Logic Signal Processing
- Various Threads and Flange Options
- Up to 20M Measurement Range
- ATEX options available
|
Technical Datasheet |
- Variants of adjustment by two buttons or by magnetic pen
- Wide range of electric connections
- Additional horn adaptor to improve the measurement of unusual media
- ATEX versions available
|
Technical Datasheet |
- Remote installation and communication via HART® protocol
- Variable installation thanks to the possibility of connection via lower or upper thread
- Intelligent numerical signal processing with the elimination of false reflections
- Choice of connection using a standard cable gland or a gland for protective hoses
- High degree of protection IP68
- With the help of a directional funnel it is possible to increase the reception of the reflected echo and to measure problematic media (foaming levels, loose materials, etc.)
