martens
- Switch-selectable inputs 0/4...20mA and 0/2...10V or -20 ... 20mA and -10 ... 10V M
- Switch-selectable outputs 0/4...20mA and 0/2...10V or -20 ... 20mA and -10 ... 10V M
- Increasing or decreasing output characteristic M
- Supply voltage 230V AC or 24V DC M
- Full 3-port isolation M
- Power-on LED M
- 22.5mm case for DIN rail mounting M
- UL-CSA-standard on request
- Switch-selectable inputs 0/4...20mA and 0/2...10V or -20 ... 20mA and -10 ... 10V
- Switch-selectable outputs 0/4...20mA and 0/2...10V or -20 ... 20mA and -10 ... 10V
- Increasing or decreasing output characteristic
- Supply voltage 230V AC or 24V DC
- Full 3-port isolation
- Power-on LED
- 22.5mm case for DIN rail mounting
- UL-CSA-standard on request
- Current range 1 A or 5 A
- Frequency range 45 ... 400 Hz
- Power-factor (cosφ) switch selectable 0.72 or 1
- Nominal accuracy 0.2 %
- Output 0/4 ... 20 mA or 0/2 ... 10 V switch selectable
- Final value adjustable -30 ... 5 %;
- Full 3-port isolation
- Supply voltage 230 V AC or 24 V DC
- 22.5 mm case for DIN rail mounting
- DC and sinusoidal AC signals
- Direct connection
- Connection with converter possible
- Frequency range 40..200 Hz
- Measuring input for DC- and sinusoidal AC-signals
- Arithmetic average value measurement RMS calibrated
- Bridge supply 2..10 V
- max. 6 DMS strain bridge sensors ≥ 300 Ω at 10 V
- Output current 200 mA max.
- Line compensation up to 1 V
- Protection class IP65
- Measuring range programmable from ±99999 Digit
- Unit programmable
- Totalizer programmable
- Output 4..20 mA, loop powered
- Impulse output for external evaluation
- 2 alarm outputs electronic, voltage free
- Measuring range 100 mbar to 10 bar
- Immersion depth: max. 100 m
- Analog output 4..20 mA
- For drinking-, process-water, oil
- Process temperature -10..+60 °C
- Protection class IP68, depth of immersion max. 100 m
 |
Technical Datasheet |
- Universal input for unit signals
- Pt100, thermocouple, potentiometer, switchable via front-side DIP switch
- 1 or 2 relay outputs
- Universal relay connection
- Adjustable min/max contact function
- Actual value output 4 .. 20mA
- 2-colour illuminated scales for limit value adjustment, colour depends on switch status
- With Pt100 sensors, monitoring of sensor break and short-circuit
- Wide-range mains adapter or 24 V DC
- Functional safety up to SIL2
- Housing width 12.5 mm
- Removal coded terminals
- Carrier rail mounting TS35 EN60715
- Safe galvanic isolation between input / output / auxiliary voltage
- Measuring ranges -1…1000 bar
- Output: 4..20 mA
- ATEX-approved
- Devices for Ex areas
- Measuring ranges -1…1600 bar
- Output: 0 or 4..20 mA
- Process temperature max 150 °C
- Measuring range 0,25 to 25 mbar
- Pressure or differential pressure
- Uni- und bidirectional variants
- For dry and non aggressive gases
- Output 4..20 mA, 2-wire technology
- For dry, non-aggressive gases
- Feed via current loop
- Version for damp media
- LCD text display
- Programming via front side keypad
- Measuring range programmable
- Output 4..20 mA, 2-wire conn
- Measuring range 0..50 Ω up to 100 kΩ
- Processor technology with 12 Bit AD/DA-converter
- Teach-in programming for start- and end-value
- Increase or decrease output characteristic programmable
- Operation mode indicated by use of a 2-color LED
- Intrinsically safe use of Pt100 sensors
- Intrinsically safe use of 0(4)…20 mA sensors
- Intrinsically safe use of 4…20 mA, loop-powerd indicators
- Current : 0/4..20 mA selectable, Ri = 25 Ω overload max. 100 mA
- Voltage : 0/2..10 V DC selectable, Ri approx. 40 kΩ, overload max. 100 V
- Pt100, Pt1000 and thermocouple
- Up to 4 alarm outputs
- LCD display with plain text
- Offers intrinsically safe inputs for direct connection of temperature probes
- Simple programming
- 2 alarm outputs
- Pt100, Pt1000 and thermocouple
- Thermoelements J, K, S
- Pt100 / Pt1000 / NTC resistance measurement
- 4..20 mA analogue output
- Universal input for Pt100, Pt1000, thermocouple, NTC and resistance measurement value
- Configuration via front DIP switches
- Analog actual value output 4 .. 20mA
- Zero point and limit value can be adjusted via trim potentiometers on the front
- Wide-range mains adapter or 24 V DCa
- Optional supply via carrier rail bus
- Removable coded screw terminals or optional push-in terminals
- Housing width 12.5 mm
- Carrier rail mounting TS35 EN60715
- Supply voltage : 85..265 V AC/110..125 V DC or 10..30 V AC/10..42 V DC
- Frequency AC : 40..400 Hz
- Power consumption : max. 2.2 W , max. 3.3 VA
- Operating temperature : -10..+60 °C
- CE-conformity : EN 61326-1:2013; EN 60664-1:2007
- Supply voltage : 85..253 V AC/110..125 V DC 10..30 V AC/DC
- Frequency AC : 40..400 Hz
- Power consumption : < 3.3 VA
- Operating temperature : -10..+60 °C
- Supply voltage : 230 V AC ±10 %; 24 V DC ±20 %
- Frequency AC : 47..63 Hz
- Power consumption : <1.5 VA
- Operating temperature : -10..+60 °C
- CE- conformity : EN 61326-1:2013, EN 60664-1:2007
- Explosion protection : Approval: TÜV 03 ATEX 2283
- Marking : II (1) G [Ex ia] IIC bzw. II (1) D [Ex iaD
- Thermocouple J, K, S
- Adjustable zero point and end value
- 0/4..20mA; 0/2..10 V switchable
- Programmable Pressure Converter
- Up to 2000 mbar measurement range
- Max over-pressure 4000 mbar
- 4-20 mA Outputs
- 4 mm pressure tube connection
- Programming via front side keypad
- For dry and non aggressive gases
|
Technical Datasheet |
|
Manual |
- Thermoelements J, K, S
- Pt100 Elements
- 0/2..10 V und 0/4..20 mA
- 4..20 mA analogue output
- Transmitter for electrical signals
- Universal input for standard signals, Pt100, thermocouple, potentiometer
- Configuration via front-side DIP switch
- Wide-range power supply or 24 V DC
- Housing width 12.5 mm
- Removal coded screw terminals
- Carrier rail mounting TS35 EN60715
- Signal conditioning – Linearisation – Characteristic adjustment
- Input for standard signals 0/2..10 V and 0/4..20 mA
- Measuring range programmable
- Linearisation and characteristic adjustment programmable via 32 bases
- Automatic input fault detection
- Signal conditioning – Linearisation – Characteristic adjustment
- Input for standard signals 0/2..10 V and 0/4..20 mA
- Measuring range programmable
- Linearisation and characteristic adjustment programmable via 32 bases
- Automatic input fault detection
