-
Flow transmitter with display
-
for pipe diameters of DN32 or larger
-
Plastic version
-
Suitable for retrofitting in existing pipelines with tapping clamps
-
Analog output 4..20 mA or 0..10 V
-
Two programmable switches
-
Selectable units in the display
-
Parameter change via rotating ring
-
Electronics housing with non-scratch, chemically resistant glass
-
Rotatable electronic housing for best reading position
The OMNI transducer located on the sensor has a backlit graphics LCD display which is very easy to read, both in the dark and in bright sunlight. The graphics display allows the presentation of measured values and parameters in a clearly understandable form. The measured values are displayed to 4 places, together with their physical unit, which may also be modified by the user. The electronics have an analog output and two limit switches. Exceeding limit values is signalled by a red LED which is visible over a long distance, and by a message in text in the display. The stainless steel housing has a hardened non-scratch mineral glass pane. It is operated by a programming ring fitted with a magnet, so there is no need to open the operating controls housing, and its tight seal is permanently ensured. By turning the ring to right or left, it is simple to modify the parameters. A preset counter (option C) enables totalisation of the flow rate quantity and signal output when the preset quantity is reached. It also offers an external reset option, antivalent switching outputs and a current value display. A totaliser with pulse output (option C1) issues a pulse cyclically after a variable amount has flown. The current flow rate is shown in the display and on the analog output.